Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working for a while it could be due to a dead battery in the coin or water damage, receiver module issues or a damaged electronic chip. Fortunately, all of these are simple to fix and you'll get your car back to normal in no time!
The key blade could become worn out and lead to a malfunctioning car key. It is easy to fix this issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.
Battery
The battery for the key fob in your Peugeot 308 can sometimes die or become insufficient to send an energizing signal to the car. This can cause the key fob's function to cease and prevent you from locking and opening the doors or starting your engine. You'll need a replacement battery for your key fob to fix this.
You can purchase a new battery at an auto parts store or at your local hardware store. Make sure that the battery is brand new and has not sitting on the shelf for too long. A new battery has more capacity and can send a stronger signal to your car.
After replacing the battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors do not unlock, it's likely that the receiver module in the car is the cause. The local Peugeot dealer can reprogram the receiver module.
It's possible that the key fob's internal chip has been damaged. It is possible to cause damage to your key fob if you drop it on the ground or expose it to water. The rubber seals that shield the chip from moisture could become worn down over time particularly if the key fob is exposed to water for extended periods of time like submerging it in the ocean at the beach. To avoid this from happening, it's important to keep your key fob safe from water and never let it come into contact with water.
Water Damage
If your key fob gets wet regardless of whether you dropped it into the pool or threw it into the puddle, don't believe that it's an accident. While the key fob comes with rubber seals that should protect it from water, long-term exposure to water can cause damage to the electronic chip. Water is a great conductor and any water that comes into the key fob can cause a series short circuits which can eventually harm the electronic chip. After removing the battery, scrub its contacts with isopropyl alcohol, and dry it completely before putting it back into.
A dead battery can also be the reason that your Peugeot 308 won't start. If you have a spare car, jumper cables could be used to get the engine going again. If you suspect that the battery is at fault then it must be replaced.
A poor receiver in the car may also block it from receiving the signal from the keyfob. The key fob could be damaged or there may be a problem with the antenna, wiring or key fob itself. If you have a new key fob it could need to be programmed for the vehicle. If peugeot 107 replacement key cost G28 are unable to solve the issue, call an expert technician. A technician trained in the field will be able to detect the issue quickly and then fix it right away.
Radio Interference
Symptoms such as key fob not being recognized or having a limited range of operation usually mean there is interference in the system. The interference can be transmitted or radiated the latter being caused by speaker and power cables passing too close to electrical parts. Generally, re-routing the cables or moving them further away from the components can resolve the issue.
It's unlikely that someone is watching your key fob's signal in attempt to steal your vehicle, but it's possible that radio interference has drowned out the signal. This is an easy issue to solve.
If you are having key fob not being recognized, try using a new battery. Also, ensure that the battery is the right type and size. Batteries that are not of the correct size can cause damage to your device.
These devices may interfere with the key signal if they use the same radio frequency. Do not connect these devices to your key fob.
Pairing Issues
The remote keyless entry system has an antenna that receives radio frequency signals from the key fob. You will not be able start your car if this receiver isn't working even if your key fob is in good working order and can be reprogrammed. The issue could be caused by a variety of factors, including a dead coin battery and water damage. The receiver could also be malfunctioning due to a software glitch or internal damage to the key.
The battery inside your Peugeot 308 keyfob may have been drained. It is easy to replace it by using a fresh battery, however, it's important to get the right battery for your key fob. A bad battery can cause more problems with the key fob, so it is best to choose the original or an alternative that is similar in size, voltage, and specifications.
Another reason why the reason your Peugeot 308 key fob might not work is because it is linked to another vehicle. This can happen if have given your key fob to a person you know or if the key has been used to unlock and start other vehicles. This can be solved by reprogramming the key fob using an OBDII scan. The scanner will usually ask you for specific information about your vehicle, for example the VIN or engine type, so it's important to enter this correctly.